Our Products

C-Way Engineering Exports�is a leading Manufacturer and Exporter of Wafer Check Valves .wafer design Check Valves is especially designed for low Pressure Applications, where min pressure drop is desired. The Non Return Valve Wafer Swing Type, offered by us, is widely demanded in the market as there is no alternative available in terms of quality and performance. Premium quality raw materials are used in the manufacturing of the Non Return Valve Wafer Swing Type that ensures high durability, tensile strength and resistivity to adverse conditions.

Features of Ball Valve

• High capacity Ball Valve Trunion Ball Valve, Floating Ball Full and reduced Bore.
  
• The anti-static design ensures electrical continuity between the Body, ball & stem.
  
• Available in Single / Two / Three pieces.
  
• Wide selection of seat materials from PTFE, CPTFE, NYLON to PEEK.
  
• 90� locating and lock structure
  
• Blow-out Proof stem
  
• Available in Manual operated- Hand Lever/Gearbox/Pneumatic-Actuator, Electric, Hydraulic operated.
  
• Investment casting in various materials SS 304, SS 304L, SS 316, SS 316L, IC CF8,IC CF8M,IC CF3, ICCF3M
  
• Metal To Metal Seated
  
• For minimum pressure drop, straight through the flow path.
  

Features of Gate Valve

• Heavy duty Gate Valves are of the bolted bonnet, rising stem with non rising hand wheel, outside screw, and yoke type.
  
• Valves are precisely designed for unobstructed flow that not only provides high flow capacity but even allows large objects, slurry, and particles to safely pass through the valve
  
• Flexible Wedge / Solid / Parallel / Double Disc.
  
• Linkage, Stem protector, Chain Pulley, and Bypass arrangement as per customer requirement.
  
• Cylindrical bottom seated-type seat rings have ample cross sections for strength, In SS Valves Integral seat ring is provided.
  
• Bellow Sealed, Cryogenic, and High Temp.
  
• Two inclined seats for tight shut-off even against high-pressure flow.
  
• Gate Vales are available in Manual operated / Gearbox / Electrical Pneumatic operated.
  
• Gate valves are suitable for heavy liquids, corrosive liquids, oil, gas, air, steam, non-condensing gases, and abrasive.

Features of Globe Valve

• Globe valves have high regulating capability as well as positive shutoff.
  
• Highly reliable and sturdy structure to ensure excellent performance.
  
• Valves are below Sealed, cryogenic, high temperature, and with pressure balancing arrangement.
  
• Individually replaceable seat and plug which makes it maintenance-friendly
  
• For higher sizes and classes, Anti-friction bearings are provided.
  
• Available in Manual operated- Hand wheel/ Gearbox/ Pneumatic-Actuator/ Electric operated.
  
• Excellent sealing against increased line pressure

Features

• Heavy-duty Rack and pinion design.
  
• Open and close adjustment stops.
  
• NAMUR Interface for easy Solenoid Valve installation.
  
• For easy mounting ISO 5211 mounting pad.
  
• Available in Hard Anodized Aluminium body and Stainless Steel version.
  
• A visual indicator, a top-mount indicator.
  
• High temperature and corrosion resistant.
  
• Fully adjustable limit switches.
  
• Easy to install and maintenance-free design.

Features

• C-Way Engineering Butterfly Valves are highly efficient and manufactured according to the International Standards- ASTM/ASME, ANSI, API, and DIN in India.
  
• The available range of Butterfly valves includes rubber-lined, PTFE-lined, Metal sealing, and High-Performance butterfly valves.
  
• Zero leakage, bi-directional Butterfly Valve.
  
• Sturdy construction, compact design
  
• Butterfly valves are specially designed for the food and beverage industry, chemical, and pharma industries.
  
• Available in Manual operated- Hand Lever/Gearbox/Pneumatic-Actuator, Electric, Hydraulic operated.

Specifications

• Design Standards: ASTM B16.34, API 526, API 520, ISO
• Sizes: 25 x 50 mm to 250 x 350 mm
  
• Rating: 150# to 2500#
  
• Material: CI, CS, Stainless steel CF8/CF8M, Alloy steel, Bronze
  
• End Connections: flanged, threaded, socket-weld, butt-weld
  
• Face to End: API 526
  
• End Flange: ASME B 16.11, DIN, BS, IS, JIS
  
• SW End: ASME B16.11
  
• Set Pressure: As per customer requirement
  
• Testing: API 527
  
• Accessories: Lever, soft seat, Test Gag, Bellows etc.

Specifications

• Size: 1/2" to 36"
  
• Material of Construction
  
• Body - Cast Iron, Carbon Steel, WCB, CF8, CF8M, Hastelloy, Bronze, Duplex, Super Duplex, Alloy, LCB etc.
  
• Disc: WCB, CF8, CF8M, Hastelloy, Super Duplex, LCB etc.
  
• Seat: EPDM, Nitrile, PTFE, Viton etc.
  
• Type: Ball type, Wafer Type, Piston Type, Spring Loaded
  
• Connection Type: Screw, Flanged, Threaded, BW.
  
• End Configuration: Wafer, Lug, Flanged
  
• End Connection Std: ASME B16.5
  
• Pressure Rating: ANSI Class 150# to 2500#
  
• Testing Std: API 598, ISO 5208, BS 6755
  
• Temperature Rating: ASTM B 16.34
  
• Design Std: ASME, BS1868, API 6D. API 602
  
• Face to Face (F to F): ASME B 16, 10/DIN IS/ BS
  

On request

• Non Slam arrangement
  
• Rubber Lining

Our Production Range-

Manufacturing Standards:

• ASTM A234: Specification for pipe fittings of wrought carbon steel and alloy steel for moderate and high-temperature service.
  
• ASTM A403: Standard specification for wrought austenitic stainless steel piping fittings.
  
• ASTM A420: Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service.
  
• ANSI/ASME B16.9: Standard for factory-made wrought butt-weld fittings.
  
• MSS SP-43: Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications.
  
• BS EN 10253: European standard for butt-welding pipe fittings.
  
• IS 1239: Indian Standard for Mild Steel Pipe Fittings.
  

Manufacturing Standards:

• We adhere to stringent quality and manufacturing standards to ensure the reliability and performance of our pipe fittings.
  
• ASTM A234: Specification for pipe fittings of wrought carbon steel and alloy steel for moderate and high-temperature service.
  
• ASTM A403: Standard specification for wrought austenitic stainless steel piping fittings.
  
• ASTM A420: Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service.
  
• ANSI/ASME B16.9: Standard for factory-made wrought butt-weld fittings.
  
• MSS SP-43: Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications.
  
• BS EN 10253: European standard for butt-welding pipe fittings.
  
• IS 1239: Indian Standard for Mild Steel Pipe Fittings.
  

• With years of experience as a lap joint flange manufacturer, we make sure our lap joint flanges are
  
• Easy to Assemble: LJ Flanges allow for easy assembly and disassembly of piping systems, making them ideal for applications requiring frequent maintenance or modifications.
  
• Flexibility: The rotational freedom provided by the stub end allows for easy alignment and adjustment during installation, reducing the risk of misalignment and stress on the piping system.
  
• Cost-Effective: They are typically more cost-effective compared to other types of flanges, as they require less welding and fabrication time.
  
• Versatility: Lap Joint Flanges can be used with a wide range of pipe materials, sizes, and schedules, providing flexibility in piping system design.

Discover high-quality Pipe Fittings available in various materials such as Carbon Steel, Stainless Steel, and Alloy Steel. Perfect for industrial applications, these fittings offer durability and reliability.

• Available in Carbon Steel, Stainless Steel, and Alloy Steel
• High-quality materials for durability
• Corrosion-resistant
• Wide range of industrial applications
• Precision engineering for seamless integration

Discover premium quality and precision-engineered Pipe Fittings by C-Way Exports. Expertly crafted to meet international standards, catering to diverse industrial needs.

• ISO 9001-2015 certified
• International standards compliant
• Wide material selection
• Special alloys available
• Stringent quality testing

Carbon Steel:

Upgrade your automotive equipment with our Aluminum Fittings featuring 1/2 NPT thread on one end and a 5/8" barbed fitting on the other. Enhance your machinery's functionality with ease.

• 1/2 NPT thread on one end
• 5/8" barbed fitting on the other end
• 90-degree bends for flexibility
• Durable aluminum construction
• Suitable for automotive use

• Material grade: ASTM A312 TP304/L, TP316/L, TP321, TP310S, TP347H, TP317L, S31803 904L, Duplex (UNS S31803/S32205), Super Duplex (UNS S32750/S32760), etc.
  
• Standards: ASTM, ASME, DIN, ASTM A312 ASTM A213 ASTM A269 ASTM A270 ASTM A554 ASTM A249
  
• Size Range: - 1/8" NB to 48" NB
  
• Type: Seamless, Welded
  
• Thickness: SCH 5, SCH 10, SCH 40, SCH 80, SCH 160, SCH XXS
  
• Length: Single Random, Double Random & Required Length
  
• End: Plain End, Beveled End, Threaded

• High-Temperature and Cryogenic Options: Available in bellow-sealed, cryogenic, and high-temperature designs to handle extreme condition. gate valves are available in manual, gearbox, electric or pneumatic operation for flexibility in control.

C-Way Check valve provides dependable performance under varying temperatures and pressure. Sealing material ensures a tight shut�off reduces the risk of leakage in the piping system. quality expertise trust .

• Premium Quality: Made from high-grade materials like carbon steel, stainless steel, bronze and brass for strength and corrosion resistance.
• Actuated Gate Valve, Actuated Knife Gate Valve (Pneumatic, Electric, Motorized). available

The Gear Operated Butterfly Valve is a reliable solution for controlling flow in your industrial machinery systems. With durable construction and motorized design, this valve ensures smooth operation and long-term performance.

• Motorized Butterfly Valve with 220v AC supply voltage
• Body material: CI, SG Iron, Disc material: SS 410
• Powder-coated disc for enhanced durability
• NBR body liner material for added protection
• Gear-operated design for smooth operation

Enhance flow control in industrial settings with our durable Two Piece Ball Valve made from ASTM A 105 material. This valve promises reliability and efficiency for your industrial applications.

• Constructed with ASTM A 105 material
• Full bore design
• 3-piece construction
• SW End Class 800#
• Includes ss 202 ball and pin

Tight Shut-Off: Designed with two inclined seats, gate valves provide a tight shut-off even against high-pressure flows preventing fluid leakage in critical industrial applications.

Bidirectional Flow: Designed for two-way flow.�

Enhance your industrial projects with our 1" Full Coupling SW CL3000 A105 Dims to ASME B16.11. Crafted from high-quality Mild Steel, this essential component ensures durability and precision.

• 1" Size
• Full Coupling SW CL3000
• Crafted from A105 Steel
• Complies with ASME B16.11 Standards
• Durable and Precise

The Stainless Steel Pipe Connector is a high-quality coupling designed for industrial applications. Its durable construction and precise dimensions ensure reliable performance.

• Premium stainless steel construction
• ASME B16.11 compliance for precise dimensions
• Corrosion-resistant for longevity
• Tight seal to prevent leaks
• Versatile 3/4" full coupling design

The 3 Way Ball Valve is a versatile component providing accurate fluid control across industrial applications. Its durable construction and reliable performance make it essential for precise fluid management.

• Provides directional fluid control
• Suitable for heating, cooling, and chemical processes
• Durable construction for longevity
• Ensures precise fluid management
• Ideal for hydraulic and pneumatic applications

�Stainless steel, carbon steel, duplex steel, alloy steel, cast iron, bronze, brass.�high-pressure hydraulic fluid systems.

Global Standards Compliance: Manufactured to American (API, ASME), European (EN, ISO), and DIN standards.

 Flange end Ball Valve SS304 combines compact design with a tight sealing mechanism to provide efficient flow control and prevent leaks. Its anti-static feature ensures safe operation in hazardous environments.

• Temperature range: -196�C to 450�C
• Seat material options: PTFE, RPTFE, CPTFE, Nylon Peek, Metal-to-Metal
• The Flange End Ball Valve with WCB Body is designed for extreme temperature

The SS304 Flange End Ball Valve Pneumatic combines precision engineering with optimal performance. Featuring a compact design, tight sealing, and anti-static properties.

• Compact design for efficient flow control
• Tight sealing for zero-leakage performance
• Anti-static properties for safe operation
• Suitable for industrial applications
• Precision engineering for optimal performance

�

� Wide Range of Materials: Stainless steel, carbon steel, duplex steel, alloy steel, cast iron, bronze, brass.

� Hydraulic Applications: Specialized hydraulic ball valves designed for high-pressure hydraulic fluid systems.

� Global Standards

Size Size 150

Body Material= Aluminum

Seal Material=NITRILE

Precision Engineering

Reliable Operation

BSP Port Connection

Seal Material=NITRILE

Efficiency and Durability

Seal Material=PTEF  

Body material = SS304 

Media Temp= 

Enhance your industrial equipment with the high-quality Needle Valve. Designed in premium SS316 material, this valve withstands pressures up to 1000PM, ensuring reliable performance.

• Constructed from premium SS316 material
• Can withstand pressures up to 1000PM
• Ensures precision control
• Durable and long-lasting design
• Corrosion-resistant for industrial environments

Experience precise control and exceptional performance with the Double Acting Pneumatic Actuator Butterfly Valve. Crafted with top-quality materials, this valve ensures reliability and efficiency for your industrial applications. Butterfly valve�

, endconnections, pressure ratings, and sizes. Whether you require a basket type, Y type, T type, or duplex strainer, we deliver custom and standard solutions to match your exact process needs. 

Elevate your industrial processes with our premium Cryogenic Ball Valves. From robust stainless steel construction to wide temperature range capability, these valves ensure top-notch performance.

Parameter Specification

Size Range ½” (15mm) to 24” (600mm)

Body Material Cast Iron, Ductile Iron, WCB, LCB, CF8, CF8M, CF3M, Duplex Steel, Super Duplex, Alloy 20, Monel, Hastelloy

Screen Material SS304, SS316, SS316L, Duplex SS, Monel, Hastelloy

Working Temperature -29°C to 425°C depending on material

n

Explore the versatility of Trunnion Mounted Ball Valve, designed for optimal performance and durability. From size options to material selections, this valve offers top-tier quality for industrial applications.

• Size Range from ¼” to 48”
• Multiple Material Options available
• Wide Pressure Rating from Class 150 to Class 2500
• Extensive Working Temperature Range of -196°C to 450°C
• Diverse End Connection Choices

Crafted from durable malleable iron, this 90-degree elbow pipe fitting is designed to effortlessly redirect fluid or gas flow. Ideal for plumbing, HVAC, and industrial use.

• Durable malleable iron construction
• 90-degree angle for flow redirection
• Threaded connections for secure fit
• Corrosion-resistant design
• Versatile application in plumbing, HVAC, and industrial systems

Explore the versatility of the Sanitary Ball Valve, an essential component designed for smart performance and durability. With multiple actuation options and controllable features, this valve offers precise control in industrial settings.

• Temperature range: -20°C to 200°C
• Actuation options: Pneumatic, Electric, Motorized
• Control modes: On/Off, Modulating, Failsafe
• Voltage range: 12V DC, 24V DC, 110V AC, 220V AC
• Torque output: 10 Nm to 3000 Nm

 end caps & plugs pipe fittings in compliance with various international standards such as ASTM/ANSI/ASME/BS/EN/DIN/JIS/IS in Carbon Steel, Stainless Steel, Duplex Steel, and Alloy Steel also available in special alloys such as Monel, Inconel, Hastelloy. We offer end caps & plugs from 1/2 inch to 24 inch size and erw, welded and fabricated end caps from 1/2 inch to 48 inch in diameter, with variations based on specific requirements to accommodate diverse piping systems demand

Upgrade your industrial infrastructure with the durable Ductile Iron Pipe DN80. Compliant with ISO2531, this pipe offers longevity and reliability.

• Complies with ISO2531, K9 standard
• Durable T-type design
• 6-meter effective length
• Cement-lined interior
• Zinc and asphalt external coating
• Includes ISO-compliant SBR rubber rings

Welding Outlets, Socket Weld Outlets, Threaded Outlets

Specifications of Pipe Outlets:-

Sizes of Pipe Outlets

• Sizes: range from 1/2" to 24" (Nominal Pipe Size - NPS).

• Custom Sizes: Can be manufactured based on customers specific needs.

Manufacturing Standards

• ASME B16.11: For forged fittings, including socket-welding and threaded.

• MSS-SP-97: For integrally reinforced forged branch outlet fittings.

• ASTM Standards: For material specifications like A105, A182, A234.

• ISO Standards: Ensuring quality management and consistency.

Discover the essential PLUGS PIPE FITTINGS for sealing and protecting pipe ends.

• Seals pipe ends securely
• Protects pipes during transit and storage
• Facilitates pressure tests
• Allows access for maintenance and repairs
• Multipurpose industrial and domestic use

Upgrade your industrial machinery with the Half Coupling Carbon Steel. Designed to deliver reliability and performance, this product is a must-have for various applications.

• ANSI B16.11 Standard Compliance

Union Pipe Fittings designed to meet diverse industrial needs with precision engineering. Available in various sizes and materials to ensure optimal performance.

• Pressure Ratings as per ASME, EN, and DIN Standards
• Temperature Ranges from -50°C to 650°C
• Seal Options: Metal-to-metal, elastomeric, or PTFE
• Wide Range of Sizes including Customization
• Materials: Carbon Steel, Stainless Steel, Alloy Steel, and Dielectric Options

Explore a diverse range of Nipple Pipe Fittings crafted for precision and durability. From stainless steel to carbon steel, these fittings cater to a wide array of industrial needs.

• Wide range of material grades available
• Adherence to top-notch threading standards
• Variety of surface finishes to choose from
• Diverse pressure ratings for different applications
• Compliance with industry standards